產品中心
Products
Products / 產品中心
1200 Full-automatic Block Stacking System
返回列表
1.Technical parameters:
| Power |
29.5KW (including 7.5kW air compressor, with actual operating power of 14.2kw) |
| Brick yards maximum size specifications |
1200(mm) L×1200(mm) W×1450(mm) H |
| Palletizing period | Average period: 15 seconds |
| Weight |
11噸 |
| Scope of brick type | Conventional brick types arranged in the same direction are applicable (except triangular bricks). |
2.Taking the periodic table:
|
Varieties
|
Brick type specification
|
Stacking size, specification and speed (I)
|
Stacking size, specification and speed (II)
|
Stacking size, specification and speed (III)
|
|
Standard brick
|
240×50×115 (mm)
|
Length: 960 × 960 wide conventional layer |
1200 long × 1200 wide conventional layer
120 pieces per layer, 96 pieces per hole layer, 20160 pieces per hour, 12 layers per stack
|
|
|
Face brick
|
100×200×60 (mm)
|
Length: 800 × 800 wide conventional layer |
1000 long × 1000 wide conventional layer |
1200 long × 1200 wide conventional layer |
|
Block brick
|
390×190×190 (mm)
|
Length: 800 × 800 wide conventional layer |
1200 long × 1200 wide conventional layer |
|
|
Brick
|
190×50×115 (mm)
|
Length: 950 × 950 wide conventional layer |
Length: 1140 × 1140 wide conventional layer |
|
The 1200 Full-automatic Block Stacking System is upgraded by Quanzhou Yihong brick machine. It can be seen whether forklift holes need to be reserved according to actual needs. The servo motor is used to push the plate and stack the bricks; Applicable to 4-18 brick machine. Whether it is standard brick, hollow brick or chain brick, 1200 full-automatic brick stacking machine can receive bricks. The 1200 full-automatic brick stacking machine can also be combined with the baling machine to achieve a one-stop solution from brick entry to brick exit. It can not only realize the separation of bricks and plates, but also make a closed-loop circuit, so that the pallet can be automatically returned to the plate feeding machine again!
